LF CUT 65KZ Pilot Arc Plasma Cutter with Built-In Air Compressor
- The 1~230V (+-10%) platform increases rated power to 7.8kVA and uses a 3G 4 mm2 copper power cable.
- Low-Frequency Pilot Arc and a higher-output 60A power stage combine with the integrated compressor for reliable ignition, clean cutting and mobile workshop use.
- The built-in compressor supports cutting up to 8 mm without external air.
- The panel provides clear cutting and air-supply monitoring.
Parameters
-
60A Built-In Compressor Platform
The 1~230V (+-10%) platform increases rated power to 7.8kVA and uses a 3G 4 mm2 copper power cable. Its 50 x 24 x 44 cm chassis weighs 20 kg while retaining the integrated-compressor format. -
High-Output Low-Frequency Dual-Air Design
Low-Frequency Pilot Arc and a higher-output 60A power stage combine with the integrated compressor for reliable ignition, clean cutting and mobile workshop use. -
Dual Air Source for Mobile & Maximum Cutting
The built-in compressor supports cutting up to 8 mm without external air. When connected to an external air source, maximum cutting capacity increases to 25 mm. -
High-Output Cutting & Air Monitoring
The panel provides clear cutting and air-supply monitoring. CUT output ranges from 20A/88V to 60A/104V, with a 20% duty cycle at 60A/104V and 100% at 40A/96V, giving the 65KZ a clear output advantage.
Frequently Asked Questions
Learn More
-
01
Q: How does the 60A KZ output expand capacity on LF CUT 65KZ?
A: LF CUT 65KZ provides 20A–60A. Match the current to the material, thickness, travel speed, torch height and consumables instead of operating at maximum by default. -
02
Q: What cutting range should be demonstrated for LF CUT 65KZ?
-
03
Q: Which electrical details matter for a built-in-air LF CUT 65KZ?
-
04
Q: What air-system difference drives the two thickness ratings of LF CUT 65KZ?
-
05
Q: What material range benefits from external air on LF CUT 65KZ?
-
06
Q: How should distributors explain LF CUT 65KZ's 8mm and 25mm ratings?
-
07
Q: What site checks are essential before using LF CUT 65KZ at 60A with external air?
-
08
Q: Which internal-air and external-air labels must be approved on LF CUT 65KZ?
-
09
Q: What certifications are available for LF CUT 65KZ?
What Our B2B Partners Say
After several months of use, I can confirm that the
station is a good station in every sense of the wordoperating factor OK,
comfortable to use and simple to handle, not very noisy
Berkane M
A client of Levin.
Just an amazing machine...works very good and
so everything !
Good buy and perfect shipping serviceforBelgium!
Buy it !!!
Frederic Danhiez
A client of Levin.
Build Your Welding Product Line with LEVIN
Send Your Custom Inquiry Now